[Flex] Fastlane printing woes and SciENcv
Karen Schwamb
kschwamb at whoi.edu
Mon Oct 19 10:40:16 EDT 2020
We have had some experience with this issue too - Paula prepared an NSF
subcontract proposal to go to the lead institution. The lead contacted
us on Friday - they were having trouble with our CV and C&P - both
created in SciENcv. They needed the files sent separate from our
submission file, as the files they extracted from our proposal
submission file would not upload. We sent them the separate files. CV
worked, CP did not.
They had been in touch with the help desk who specified that we must
*download* pdf forms generated from SciENcv - we should not print from
file. We sent a downloaded file this morning and have not heard whether
it did the trick or not.
On 10/19/2020 10:14 AM, Jean Davis Taft wrote:
>
> Good morning,
>
> Susan Sholi is working on an NSF collaborative proposal and has been
> having trouble printing the complete proposal. She has been in touch
> with the Help Desk and has received the following correspondence. Has
> anyone else had trouble with printing? We are not using the fillable
> forms, of course, but this may be an issue to keep in mind when
> working with collaborators.
>
> Thanks,
> Jean
>
> *****
>
> Hi Everyone,
>
> I am working on a proposal in Fastlane that will not print. I believe
> all of the WHOI documents are okay and that the problem is with one of
> the collaborator's documents. But there does seem to be a problem with
> MAC users so in case any of you are using a MAC for biosketches and
> C&Ps in SciENcv, I wanted to pass this along.
>
> Best,
> Susan
>
> -------- Forwarded Message --------
>
> *Subject: *
>
>
>
> Number: INC0463888 - Problems printing entire proposal in Fastlane
> (proposal 8090161 for Caroline Ummenhofer (Lead TPI : 8091040)
>
> *Date: *
>
>
>
> Fri, 16 Oct 2020 07:17:55 -0700 (PDT)
>
> *From: *
>
>
>
> Fastlane <fastlane at nsf.gov> <mailto:fastlane at nsf.gov>
>
> *Reply-To: *
>
>
>
> Fastlane <fastlane at nsf.gov> <mailto:fastlane at nsf.gov>
>
> *To: *
>
>
>
> shsholi at whoi.edu <mailto:shsholi at whoi.edu>
>
>
> Good morning!
>
> There is an advisory posted that has to do with the fillable pdf's (https://www.fastlane.nsf.gov/fastlane.jsp?t=0&idx=0) and we've included some additional tips below as well:
>
>
> Issue – Some C&P and Bio sketches (most likely fillable PDFs), are
> causing print entire errors in Fastlane (one bad file spoils the bunch).
>
> It can also occur on a SciencV template – However, if you look at
> properties closely, it is because users further processed/saved the
> file on a Mac.
>
> For Mac user:
>
> Cause: These problem files are generated by Macs with various
> applications. Safari, Preview are known problem applications. Chrome
> can also produce the same error but not consistently
>
> How to determine a file fits this profile?
>
> Open the file in Acrobat Adobe/File/Properties
>
> Look at PDF Producer. It will have Quartz
>
> -------- Forwarded Message --------
>
> *Subject: *
>
>
>
> Number: INC0463876 - Prepareing Collab proposal - When attempting to
> print entire proposal she receives an HTTPS error
>
> *Date: *
>
>
>
> Fri, 16 Oct 2020 17:59:25 -0700 (PDT)
>
> *From: *
>
>
>
> Fastlane <fastlane at nsf.gov> <mailto:fastlane at nsf.gov>
>
> *Reply-To: *
>
>
>
> Fastlane <fastlane at nsf.gov> <mailto:fastlane at nsf.gov>
>
> *To: *
>
>
>
> shsholi at whoi.edu <mailto:shsholi at whoi.edu>
>
> Hello,
>
> Thank you for contacting IT Help Central.
>
> Please make sure you are using Internet Explorer or Firefox browsers.
> Chrome and Safari are inconsistent with our websites. Also clear your
> browsing history and cache, then attempt again.
>
> This error could be due to a file corruption, which affects only the
> Entire Proposal print option. If you are unable to view/print your
> entire proposal due to the error, please attempt to view each
> section/module in the print view, individually as a work-around. This
> usually occurs when attempting to delete files from the Additional
> Single Copy documents section and the systems "masks" one or more of
> the files. This can also be due to the Biographical Sketch and Current
> & Pending Support documents (using fillable PDF or SciENcv document).
>
> If the proposal is still a Temporary Proposal, go to the Print option
> and click on the "GO" button for EACH section (even if you believe you
> deleted a particular section or have "no entries" in that section).
> The area that mimics the error message you receive when you attempt to
> print the entire proposal, is the section where the error is
> occurring. Access that module where the error is located in the Form
> Preparation Page. Utilize the 'GO' button. Upload a placeholder PDF
> ("dummy" PDF) in that section to assist the system with "unmasking"
> the hidden documents. Once the files are unhidden, remove the
> placeholder/dummy document and the masked file from that section by
> clicking Delete.
>
> Once you complete all updates, navigate back to check the Print option
> this should allow you to Print Entire Proposal. *Please note* It MAY
> show as no current files due to the corrupted file, this is a known
> anomaly, the files will show up after the placeholder/dummy PDF is
> uploaded.
>
> You may have to redownload the documents to your computer directly,
> without making edits and then edit the documents once downloaded onto
> your computer. In the case of the Fillable PDF, you may have to
> download the file directly, open in Adobe and edit the PDF in Adobe.
>
> We apologize for any inconvenience this has caused. This should
> resolve your issue and we are CLOSING your Service Request ticket.
>
> *Please Note* If you need further assistance, please contact us at
> ITHelpCentral at nsf.gov <mailto:ITHelpCentral at nsf.gov> or via phone at
> 1-800-673-6188.
>
> Best Regards,
> IT Help Central Support
>
> *And this email arrived this morning from one of the other
> institutions involved in the collaborative:*
>
> Good morning All,
>
> We received the final approval for submission of the proposal due
> tomorrow. If everyone is ready to submit, please let me know
>
> As for printing the entire proposal, I’m not sure if we will be able
> to prior to submission. However, I was told that after it is
> submitted, with the assistance with the help desk, we can print it
> afterwards.
>
> */Adrienne/*
>
> *Adrienne R. Washington*
>
> *Sponsored Programs Administrator, Office of Sponsored Programs*
>
> p:* 804-684-7798 *f:* 804-684-7614 *e:*arwashington at vims.edu
> <mailto:arwashington at vims.edu>
> *a:* PO Box 1346, 1370 Greate Rd, Gloucester Point, VA 23062*
>
>
> _______________________________________________
> Flex maillist - Flex at whoi.edu
> http://mailman.whoi.edu/mailman/listinfo/flex
--
Karen Schwamb / Administrative Associate
Applied Ocean Physics and Engineering Department
Woods Hole Oceanographic Institution
266 Woods Hole Rd., MS 12
Woods Hole, MA 02543
Telephone: 508-289-2675
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.whoi.edu/pipermail/flex/attachments/20201019/fe4fc579/attachment-0001.htm
More information about the Flex
mailing list